Our aim is to provide the market and the customers with customized solutions,
Whatever a single product or complete sets of equipment.
Stainless Steel Submersible Pump will cause scale formation after long-term use, especially for submersible pumps used under certain harsh water conditions, this problem is more likely to occur. When the scale accumulates to a certain level, the speed of the water pump will slow down, so the performance will be reduced. Therefore, cleaning the scale in the pump regularly can ensure the normal operation of the pump. Let us see what the cleaning method looks like:
If the scale is immersed in oxalic acid, hydrochloric acid can also be used, but the concentration of hydrochloric acid should be controlled. If the acidity is too high, it will corrode the stainless steel submersible pump. If it is rust, you can lubricate it with oil or use a pipe wrench. Of course not to put hydrochloric acid.
If the motor does not rotate, you can apply some loose liquid to the bearing. After loosening, you can fill in some lubricant. It can be formed without proper maintenance. When not in use for a long time, drain the water and store the desiccant in the pump. Add some rust inhibitors in the water, the effect will be better. The scale in the stainless steel submersible pump cavity is mainly caused by high water temperature. There is a scale at high temperatures. If there is more scale, there will be no gap in the pump chamber and the pump will not move. Therefore, the circulating water should control the water temperature.
Here is how to clean the stainless steel submersible pump. Currently, there is no more and better way to clean the pump. The most important thing is to rely on everyone to develop a habit of regular cleaning. Don't wait until the balance has accumulated to a certain level. Affect the operation of the submersible pump during the descaling process. When using submersible pumps, it is necessary to give full play to their performance and improve pump utilization.